Rockwell Rk Rockwell RK3441K Compact Circular Saw Kit

Rockwell Rk Rockwell RK3441K Compact Circular Saw Kit

Rockwell Rk Rockwell RK3441K Compact Circular Saw Kit

• Compact Size for excellent maneuverability, portability and control
• Smaller, thinner blade for less tool strain, resulting in full-size circular saw cutting speed and performance
• Easy set depth-gauge lever for quick setup and cutting adjustments
• Quick and easy cut depth adjustments up to 2-Inch
• 4-1/2-inch blade, 5-Amp and weighs less than 5 pounds

  See more product details

Rockwell Rk Rockwell RK3441K Compact Circular Saw Kit

Rockwell Rk9000 Jawhorse This accessory may not look like much

Rockwell Rk9000 Jawhorse This accessory may not look like much

This accessory may not look like much, but what it gives you is another 14 inches of clamping in the throat, and the ability to make some outriggers for the Rockwell RK9000 Jawhorse to support really big stuff like a 4x8 sheet of plywood. Plus along with the bigger throat clamp, are two support gizmo clamps that you can use 2x2 or 2x4 as extension legs for the support.

Rockwell Rk9000 Jawhorse This accessory may not look like much

Rockwell recommends that you make your outriggers out of wood, so that if you misjudge your cut with your saw, that you don't hurt yourself or the blade. (cutting into the Jawhorse itself would also not be good. But it's easier to see where the Jawhorse is than a wide underneath support beam.)

The new throat has 4 sets of screw holes, two at each end. For mid sized stuff, you can screw the support wood right through the throat. For really big pieces, just screw the back piece, and let the front one float on the extension legs. If you use a 10ft 2x4 it will sit flat, provided your extension legs aren't pushing it up.

14 inches may not sound like much either but it's the difference between clamping a piece of 4x8 plywood or going back to a sawhorse setup. And you bought the Jawhorse to have something better. So if you handle/cut the big stuff, even occasionally, it's worth it. Also the side leg support clamps can be used to support a 2x4 for a do-it-yourself miter box table. And has been mentioned, it doesn't take up much room in your shop for the rest of the time. 

Rockwell Rk9000 Jawhorse This accessory may not look like much

Rockwell Rk9000 Jawhorse

Rockwell Rk9000 Jawhorse

This accessory enhances the versatility of the Jaw Horse. I would recommend it for any home owner who works alone and has to handle any type of larger, sheet building materials.
a really great item, does a great job, very well made, love it
I received my jawhorse plywood accessory and have already put it to use. It held a full sheet of plywood that I needed to build a platform for my handicap ramp. It worked very well and made my work so much easier. I was also able to use it for cutting other boards.
I would recommend it to all others. I am very pleased with this purchase.

Rockwell Rk9000 Jawhorse

Jawhorse Plywood Jaw Accessory Attachment

Jawhorse Plywood Jaw Accessory Attachment

I bought this for my husband to use with his Jawhorse because he is always cutting plywood for one project or another. He is always wanting me to hold the plywood while he cuts or he is out there trying to hold the plywood with one hand and/or knee while he tries to cut with the saw with the other hand. Meanwhile, it is sliding one way or another or the board is bending or the saw is jamming while he is trying to cut.

Jawhorse Plywood Jaw Accessory Attachment

Not any more! With the Jawhorse Playwood Jaw Accessory Attachment, he can tighten the plywood down and is free to cut using both hands on the saw. No sliding, bending, or saw getting jammed. He can cut a 4 foot by 8 foot sheet without my help. He does use other saw horses to hold the board up sometimes but he doesn't have to because of the tightening handle that he just pumps with his foot to get the plywood nice and tight in the vice. What a great addition to his Jawhorse!
Jawhorse Plywood Jaw Accessory Attachment

If you were to buy only ONE accessory for your jawhorse this is it Rockwell Rk9000 Jawhorse

If you were to buy only ONE accessory for your jawhorse this is it Rockwell Rk9000 Jawhorse

When I got my jawhorse I did not want to buy all the accessories for it, I wanted one accessory that with a little imagination on my part, I could modify to do several jobs. By modify I do not mean actually changing this plywood jaw, I mean figuring out ways I can get it to work as a worktable,a miter saw bench, and whatever else I can come up with.

I believe I picked the right accessory here. I don't need a welding jig but I bet I could figure something out using this jaw. As I said in the title of this review if you were to buy just one accessory for the jawhorse this is the one.

I see where others have downgraded their reviews of this product because it is too heavy. If you want a tool that is of good quality, and will last for years, it's going to be heavy. This plywood jaw will be around doing it's job long after I have departed this life. I'm a disabled older man and I do not think it is too heavy.

I'm very impressed with the quality of it. I knew it would be good when I got it but it turned out even better than I was expecting. 

If you were to buy only ONE accessory for your jawhorse this is it Rockwell Rk9000 Jawhorse

 
If you were to buy only ONE accessory for your jawhorse this is it Rockwell Rk9000 Jawhorse

Excellent Accessory Rockwell Rk9000 Jawhorse

Excellent Accessory Rockwell Rk9000 Jawhorse

I am a very happy user of the JawHorse, and the plywood jaws live up to the same quality standard.

The Plywood jaw is just a longer jaw with the same heavy-duty construction as the normal JawHorse jaw. It's easy to install aned works well. Includes connectors to quickly add outriggers made from 2X4's (you supply the 2X4's).

Excellent Accessory Rockwell Rk9000 Jawhorse

Rockwell Jawhorse This accessory is simply

Rockwell Jawhorse  This accessory is simply

This accessory is simply a replacement jaw for the one that comes with the Jawhorse. I have found it to be quite useful and it isn't so large as to represent a storage headache. It has a significantly wider throat than the basic jaw and so can't be reversed. It also has a wider base, but not so much as to provide additional lateral support. It's very easy to remove and reinstall either this or the basic jaw on the Jawhorse, so that's not an issue.

Rockwell Jawhorse  This accessory is simply

For working with a 4x8 piece of plywood you need to do something to support the overhang (hardly surprising). 2 clamps are included to construct outriggers using either 2x2 or 2x4 stock to serve this purpose (think in terms of an 8 foot piece with a leg clamped on each end ... the cross piece is laid across the inside of the jaw to provide the support). It's a simple jig to create and is more effective than some of the silly things I've done using saw horses in the past. 

Rockwell Jawhorse  This accessory is simply

Strong, well-built attachment useful for many jobs Rockwell Rk9000 Jawhorse

Strong, well-built attachment useful for many jobs Rockwell Rk9000 Jawhorse

Strong, welded construction of heavy gauge steel. Easy to swap in and out with the standard, shorter Jawhorse jaw. The end plate includes a layer of dense rubber for cushioning and grip. It does the job, as advertised, providing a stable vise platform with wide application. On relatively flat ground, you can even use it to hold 4x4 fence posts centered in a hole at the desired height while you shovel in cement and rod it. I have found my Jawhorse to be a very useful accessory, especially for my power miter box and router table. I drilled two sets of holes in that attachment. The plywood jaw just extends that flexibility.

 

Strong, well-built attachment useful for many jobs Rockwell Rk9000 Jawhorse

Its okay if this is what you are looking for. A mobile vise that you can take to most job sites.

Strong, well-built attachment useful for many jobs Rockwell Rk9000 Jawhorse 

Rockwell Rk9000 Jawhorse Easily attaches to Jawhorse

Rockwell Rk9000 Jawhorse Easily attaches to Jawhorse

so far every thing i is fine, it fits the jaw horse fine delivery was just like was promised . I have not had a chance to use it yet but am looking forward to very soon .

 Rockwell Rk9000 Jawhorse Easily attaches to Jawhorse

Easily attaches to Jawhorse and hold plywood secure for cutting. If you already own a jaw horse I would recommend that you buy this attachment. I have used it to hold other wood items to support nailing.

 Rockwell Rk9000 Jawhorse Easily attaches to Jawhorse

Works like a charm! Easy installation especially when you are missing an assistant! It's like having an extra set of hands! 

Somewhat dissappointed and Rockwell Rk9000 Jawhorse

Somewhat dissappointed and Rockwell Rk9000 Jawhorse

Although I am very happy with my Rockwell Jaw Horse, I am less than happy with the plywood accessory. The first time I tried to use it, the spot welds holding the clamping surface onto the main part of the accessory broke. I debated whether to send the accessory back for replacement but decided rather to just drill two holes and bolt the part part back into place rather than go through the hassle of the return. Also, since the accessory was advertised as new, I reasoned that the exchanged part might have the same design flaw as the one I sent back and the fix was simple enough to do. It is not as pretty as it was but it works. If the product I received was indeed new, Rockwell needs to redesign the assembly of this part.

Somewhat dissappointed and Rockwell Rk9000 Jawhorse