Rockwell Rk9000 Jawhorse This accessory may not look like much
This accessory may not look like much, but what it gives you is another
14 inches of clamping in the throat, and the ability to make some
outriggers for the Rockwell RK9000 Jawhorse
to support really big stuff like a 4x8 sheet of plywood. Plus along
with the bigger throat clamp, are two support gizmo clamps that you can
use 2x2 or 2x4 as extension legs for the support.
Rockwell Rk9000 Jawhorse This accessory may not look like much
Rockwell
recommends that you make your outriggers out of wood, so that if you
misjudge your cut with your saw, that you don't hurt yourself or the
blade. (cutting into the Jawhorse itself would also not be good. But
it's easier to see where the Jawhorse is than a wide underneath support
beam.)
The new throat has 4 sets of screw holes, two at each end.
For mid sized stuff, you can screw the support wood right through the
throat. For really big pieces, just screw the back piece, and let the
front one float on the extension legs. If you use a 10ft 2x4 it will sit
flat, provided your extension legs aren't pushing it up.
14
inches may not sound like much either but it's the difference between
clamping a piece of 4x8 plywood or going back to a sawhorse setup. And
you bought the Jawhorse to have something better. So if you handle/cut
the big stuff, even occasionally, it's worth it. Also the side leg
support clamps can be used to support a 2x4 for a do-it-yourself miter
box table. And has been mentioned, it doesn't take up much room in your
shop for the rest of the time.
Rockwell Rk9000 Jawhorse This accessory may not look like much
Rockwell Rk9000 Jawhorse
This accessory enhances the
versatility of the Jaw Horse. I would recommend it for any home owner
who works alone and has to handle any type of larger, sheet building
materials. a really great item, does a great job, very well made, love it I received my jawhorse plywood
accessory and have already put it to use. It held a full sheet of
plywood that I needed to build a platform for my handicap ramp. It
worked very well and made my work so much easier. I was also able to
use it for cutting other boards.
I would recommend it to all others. I am very pleased with this purchase.
Rockwell Rk9000 Jawhorse
Jawhorse Plywood Jaw Accessory Attachment
I bought this for my husband to use with his Jawhorse because he is
always cutting plywood for one project or another. He is always wanting
me to hold the plywood while he cuts or he is out there trying to hold
the plywood with one hand and/or knee while he tries to cut with the saw
with the other hand. Meanwhile, it is sliding one way or another or
the board is bending or the saw is jamming while he is trying to cut.
Jawhorse Plywood Jaw Accessory Attachment
Not any more! With the Jawhorse Playwood Jaw Accessory Attachment, he
can tighten the plywood down and is free to cut using both hands on the
saw. No sliding, bending, or saw getting jammed. He can cut a 4 foot by
8 foot sheet without my help. He does use other saw horses to hold the
board up sometimes but he doesn't have to because of the tightening
handle that he just pumps with his foot to get the plywood nice and
tight in the vice. What a great addition to his Jawhorse!
Jawhorse Plywood Jaw Accessory Attachment
